CO2 Incubator is designed to maintain a constant temperature and humidity level for the growth of tissue. It maintains a CO2 atmosphere for the optimum results. There are a water reservoir and an atomizer system provided with the device to maintain humidity at a specific level. Owing to its premium quality and high performance, we are experiencing a huge demand for the equipment in the marketplace. Clients can get the CO2 Incubator delivered to their doorstep within the stipulated time frame.
Technical Specifications
Brand | RICO | |
Capacity | ||
Interior Dimension (W X D X H) mm | 450 x 400 x 600 mm | |
Exterior Dimension (W X D X H) mm | 600 x 630 x 965 mm | |
No. of shelves (supplied) | 2 Nos. | |
Temperature Range | 5oC above ambient to 50oC | |
Temperature Controller | Microprocessor based PID Controller LCD & Touch Screen | |
Temperature Uniformity | +0.5oC at (37oC ±0.5oC) | |
Temperature sensor | PT-100 | |
Display | LCD/LED | |
Interior chamber | Fully rounded corners (304) | |
Temperature Controllability | + 0.10C | |
CO2 Controllability | + 0.2% | |
Heating system | Direct Heat & Air-Jacketed & Water-Jacketed | |
CO2 | Range | 0 - 20% |
Accuracy | ±0.5% | |
Sensor | infrared CO2 sensor | |
Rate | ≤ 10 minutes | |
Humidity | Above 90% | |
Water reservoir system | 3 liters | |
Insulation | 75 mm (Glass Wool) | |
Construction | Inner SS 304 & Outer GIPC | |
Air Circulation Fan | Inbuilt | |
Power Consumption | 750W | |
Power supply | 220 V , Single Phase 50/60Hz | |
Direct Heat & Air jacket system with three sources of heat- sides door and independent bottom heaters, all of which should be located outside the chamber. | ||
Should have field reversible door. | ||
Alarm system: High/low temperature CO2 level, door & UV lamp, independent overheat protection. | ||
Should have option for programmable decontamination with continuous UV sterilization of air & humidity source (UV lamp completely isolated from cell cultures decontamination method should not trap contaminants inside the incubator or require temporary removal of any components). |